> For the complete documentation index, see [llms.txt](https://docs.raidrobotics.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.raidrobotics.org/electrical/training/advanced-training/lesson-a1-soldering.md).

# Lesson A1 - Soldering

How to solder two wires safely and well. Crimp a connection you'll want to unplug; solder one that should be permanent.

## Key terms

| Term             | What it means                                                                                                                                                  |
| ---------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Before you start | Good ventilation (the fumes are harmful), safety glasses, a wet sponge or tip cleaner, and heat shrink slid onto the wire first. Tell people you're soldering. |
| Tinning          | Coating the stripped end (about 1/2 in) with solder: no copper showing, no blobs, the strands' shape still visible. Flux helps.                                |
| Joining          | Hold the two tinned ends side by side and heat them until the solder flows together. Don't melt the insulation.                                                |
| Insulating       | Slide the heat shrink over the joint and shrink it with a heat gun, not the iron. Never use electrical tape.                                                   |
| Checking         | Look at it, then tug it. If you can pull it apart, redo it.                                                                                                    |
| Iron safety      | Never touch the tip to see if it's hot, and always put the iron back in its stand.                                                                             |

## Slides

{% hint style="info" %}
The slides are from FRC Team 1678 Citrus Circuits' electrical training. Parts named in them are what 1678 used when the deck was made; our robot may differ, so check the current wiring reference sheet.
{% endhint %}

{% embed url="<https://docs.google.com/presentation/d/1wo_As5Ju7huFNAzqd3VNYfvl3QAiTAG3VPXFzQd0tIE/edit?slide=id.g237f46a31b0_0_0#slide=id.g237f46a31b0_0_0>" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.raidrobotics.org/electrical/training/advanced-training/lesson-a1-soldering.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
