> For the complete documentation index, see [llms.txt](https://docs.raidrobotics.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.raidrobotics.org/manufacturing/cam/cam-in-fusion.md).

# CAM in Fusion

How to program parts for the CNC router in Fusion 360: naming, presets, and speeds and feeds for aluminum and polycarbonate.

***

### CAM Naming Procedure

Name every setup of every part you CAM with its [CNC program number](https://docs.raidrobotics.org/manufacturing/cam/cnc-program-numbers.md). The router won't load a program with a longer name.

***

### CAM Presets

This document provides screenshots of the recommended speeds, feeds, offsets, and depths for machining aluminum and polycarbonate materials using a 3-flute, 3/16-inch diameter end mill.

{% hint style="success" %}

#### Confirm Material Before Programming Completed Design Part

{% endhint %}

| Operations / Material                             | Polycarbonate                                                                                                                                                                                                                                 | Aluminum                                                                                                                                                                                                                                      | Plywood |
| ------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------- |
| **2-D Contour Operation: Tool Section**           | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-48db50156457560b88479d7ff728d89617aa0c08%2Fimage.png?alt=media" alt="" data-size="original">       | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-5f89e1603ce2cec01089f3bd72dd18e5d56c064e%2Fimage%20(1).png?alt=media" alt="" data-size="original"> |         |
| **Drill Operation: Tool Section**                 | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-8372c0307fb3a7141074adf4e3536f8f4b9af794%2Fimage%20(2).png?alt=media" alt="" data-size="original"> |                                                                                                                                                                                                                                               |         |
| **2-D Contour Operation: Geometry Section: Tabs** | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-21bf93bcb0458451562c8dc17d8058fa974ffbfd%2Fimage%20(3).png?alt=media" alt="" data-size="original"> | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-21bf93bcb0458451562c8dc17d8058fa974ffbfd%2Fimage%20(3).png?alt=media" alt="" data-size="original"> |         |
| **Any Operation: Heights Section: Bottom Height** | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-089f5db9fba4910489d518e8b2123b0366597798%2Fimage%20(5).png?alt=media" alt="" data-size="original"> | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-089f5db9fba4910489d518e8b2123b0366597798%2Fimage%20(5).png?alt=media" alt="" data-size="original"> |         |
| **Any Operation: Passes Section**                 | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-ab93c572e947d66fc6d66c5dbaad9e0c5c73ecb6%2Fimage%20(7).png?alt=media" alt="" data-size="original"> | <img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-6c63fb5e555567788e6257c1c7fd24341a18f9f5%2Fimage%20(8).png?alt=media" alt="" data-size="original"> |         |

***

### CNC Inputs

This section describes the general CNC Machine Type Inputs when programming completed design parts.

***

### Tool

This section provides the specific Fusion Tool Library Manifest for all cutter types available in Fusion 360. For the purposes of the Robotics Team, this section should highlight the **3/16" Flat End Mill**.

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-d388010a8f74f220d18d16cc24ae25fabafd063e%2Fimage%20(9).png?alt=media" alt=""><figcaption></figcaption></figure>

***

### Coolant

This section provides the Coolant Options available in Fusion 360.\
**Note:** For the purposes of the Robotics Team, coolant should always be set to **Disabled**.

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-0e6e43847e76634614097564b9ce5779b6a48985%2Fimage%20(10).png?alt=media" alt=""><figcaption></figcaption></figure>

***

### Polycarbonate: Speeds and Feeds Using 3/16" Endmill

#### Contour Operations

* If your contour is on the outside, make sure you have **tabs** selected.

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-0393c06a4d8e46d76432b957b57001873bacf150%2Fimage%20(11).png?alt=media" alt="" width="268"><figcaption></figcaption></figure>

**Heights Selection**

* Select bottom height offset: `-0.3 mm`

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-089f5db9fba4910489d518e8b2123b0366597798%2Fimage%20(5).png?alt=media" alt="" width="276"><figcaption></figcaption></figure>

**Passes Section**

* Select **multiple depths**

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-ab93c572e947d66fc6d66c5dbaad9e0c5c73ecb6%2Fimage%20(7).png?alt=media" alt="" width="300"><figcaption></figcaption></figure>

***

### Drilling Operations

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-8372c0307fb3a7141074adf4e3536f8f4b9af794%2Fimage%20(2).png?alt=media" alt="" width="284"><figcaption></figcaption></figure>

***

### Aluminum: Speeds and Feeds Using 3/16" Endmill

#### Contour Operations

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-5f89e1603ce2cec01089f3bd72dd18e5d56c064e%2Fimage%20(1).png?alt=media" alt="" width="268"><figcaption></figcaption></figure>

* If your contour is on the outside, make sure you have **tabs** selected.

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-21bf93bcb0458451562c8dc17d8058fa974ffbfd%2Fimage%20(3).png?alt=media" alt="" width="270"><figcaption></figcaption></figure>

**Heights Selection**

* Select bottom height offset: `-0.3 mm`

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-089f5db9fba4910489d518e8b2123b0366597798%2Fimage%20(5).png?alt=media" alt="" width="276"><figcaption></figcaption></figure>

**Passes Section**

* Select **multiple depths**

<figure><img src="https://1562593674-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FDzjyXcQsEe3JO5qxyNOA%2Fuploads%2Fgit-blob-6c63fb5e555567788e6257c1c7fd24341a18f9f5%2Fimage%20(8).png?alt=media" alt="" width="279"><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.raidrobotics.org/manufacturing/cam/cam-in-fusion.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
