Docs are still under development. Information will be changing rapidly over the next few months.
Go to Monday.com

Workflow

Workflow to Computer Numerical Control (CNC) Parts

This document outlines the workflow and steps for CNC programming parts in Fusion 360. It also includes guidance on speeds, feeds, offsets, depths and tool libraries.

CNC Naming Procedure

Please follow the naming procedure outlined in the CNC Program # section of this Part Numbering and Nomenclature document. This should be done for all setups of every part that is CAM'ed.

CNC Presets

This document provides screenshots of the recommended speeds, feeds, offsets, and depths for machining aluminum and poly-carbonate materials using a 3-flute, 3/16-inch diameter end mill.

Baseline Calibration

At the start of off-season meetings prior to the end of the year, begin going through the following checklist to ensure you prepare your machine for functional and performance success for the next competitive season. Additionally, step-by-step procedures to perform each of the baseline calibrations will be provided.

Re-evaluate checklist at least once per competitive year. Additional individual calibrations may be performed depending on situation.

CNC Procedure Workflow

Router Anatomy

This section provides the terminology, characteristics, and operations available from the 3-Axis CNC router and connected control interface.

Machine Elements

This section provides individual high level elements that make up a 3-Axis CNC machine:

  • Router Table [Insert Step-by-step procedure, including necessary images for each step]

  • Wasteboard [Insert Step-by-step procedure, including necessary images for each step]

  • Gantry [Insert Step-by-step procedure, including necessary images for each step]

  • Collar [Insert Step-by-step procedure, including necessary images for each step]

  • Cutter [Insert Step-by-step procedure, including necessary images for each step]

  • Power Box [Insert Step-by-step procedure, including necessary images for each step]

  • Coordinate System [Insert Step-by-step procedure, including necessary images for each step]

Control Panel Features

  • Movement [Insert Step-by-step procedure, including necessary images for each step]

  • Reset Origin Point [Insert Step-by-step procedure, including necessary images for each step]

  • Data Management [Insert Step-by-step procedure, including necessary images for each step]

Machine Setup

This section provides the required steps to run and manage the performance of the machine.

  • Performed Wasteboard Flattening Code [Insert Step-by-step procedure, including necessary images for each step]

  • Cutting Fluid Container Filled [Insert Step-by-step procedure, including necessary images for each step]

  • Empty Material and Liquids from Vacuum [Insert Step-by-step procedure, including necessary images for each step]

  • Clamping Fixtures Checklist [Insert Step-by-step procedure, including necessary images for each step]

  • Spindle Drill Bit Replacement [Insert Step-by-step procedure, including necessary images for each step]

  • Z-Probe Calibration [Insert Step-by-step procedure, including necessary images for each step]

  • Remote Internal Drive Data Clearing [Insert Step-by-step procedure, including necessary images for each step]

  • Material Checklist [Insert Step-by-step procedure, including necessary images for each step]

Cutting Preparation

This section provides the necessary steps to turn CNC programmed designs into a reality.

Configuration Setup

[Insert Step-by-step procedure, including necessary images for each step]

Import Code

To receive the name of the required CNC program code to import, communicate with the CNC programmer.

If unfamiliar with the naming convention, refer to the CNC Program Numbering page. If you are wanting to learn more of the CNC Programming Process, refer to the CAM Programming page.

For CNC Operators who may be monitoring the progress throughout the cutting process and are curious of how long the process will take, refer to the CNC Cutting Simulation section.

[Insert Step-by-step procedure, including necessary images for each step]

To ensure safety for the operators of the CNC Router, remember to always be safe by wearing Safety Glasses, Staying Aware of your surroundings, and keeping any parts of the body away from the HIGH SPEED and SPINNING spindle.

PLEASE GET MENTOR APPROVAL PRIOR TO MOVING TO NEXT STEP! FAILURE TO GATHER APPROVAL MAY LEAD TO RISK OF THE FOLLOWING: HUMAN SAFETY, MACHINE HEALTH, AND PART QUALITY!!

Running Code

[Insert Step-by-step procedure, including necessary images for each step]

Monitoring CNC Program Procedure

[Insert Step-by-step procedure, including necessary images for each step]

Removing Cut Parts

[Insert Step-by-step procedure, including necessary images for each step]

Post-Machining Parts

This section provides the necessary steps after completing a machining process.

  • Post-Processing Fresh Parts [Insert Step-by-step procedure, including necessary images for each step]

  • Safety Cleaning and Finishing [Insert Step-by-step procedure, including necessary images for each step]

  • Design Comparison and Labeling [Insert Step-by-step procedure, including necessary images for each step]

  • Transfer Part to Assembly [Insert Step-by-step procedure, including necessary images for each step]

PreviousOverviewNextOverview

Last updated

Was this helpful?